Water-based crystal varnish Français
Description
High quality water-based polyurethane AQUAVERNIS is extremely durable and highly resistant against abrasion, water, alcohol and commun household products. This varnish, available in gloss and semi-gloss finish is practically odorless, easy to clean and will not yellow. AQUAVERNIS is formulated to protect interior wood floors.
Surface Preparation
Sand completely along the wood grain with a coarse sandpaper (80) then finish with a finer sandpaper (120) until a smooth and uniform surface is obtained. Remove completely dust or any deleterious substances and debris. Sandpaper resulting dust must be removed with a vacuum cleaner and followed by a final cleaning with a solvant humid pad to eliminate any trace of dust. We recommend the use of THIROCO SCELLEUR 100 as primer for wood floors.
Application
It is important to stir the product before and during its use. Temperature and relative humidity are critical factors for an appropriate drying. For the application and curing of AQUAVERNIS, temperature should be more than 10ºC, however best conditions are 25ºC and 50% of relative humidity. Pour a small quantity directly on the floor or in a paint pan and spread the finish evenly and uniformly using a pure silk bristle brush or a pad applicator. Allow a minimum of 2 hours between coats according to ambient conditions. It is necessary to sand lightly the surface with a sandpaper of 180 to 220 along the wood grain between coats and taking care of removing any dust coming from sanding. We recommend to apply 2 coats of AQUAVERNIS along with SCELLEUR 100 or 3 coats if SCELLEUR 100 is not used.
Use
COVERAGE 3.78 litres covers up to 55.7 m² ( 600 ft²). May vary according to application method, surface conditions and applicator’s skills.
Cleanning
Clean tools with water.
Package
Avalable in 3.78 L.
Storage
Keep from freezing.
Shelf Life
Protect from freezing. This product can be preserved in its original container, sealed for 1 year from date of purchase.From purchase date, this product can be stored 12 months when kept in its tightly closed original container. Store at temperatures
Technical Data Table
Aquavernis Semi-Gloss Gloss
Color Whitish
Gloss Semi-Gloss (50° to 60°) High Gloss (85°)
Compatible Primer Thiroco Scelleur 100
Solvant Water
Coverage / 3.78 L 29,7 to 55,7 m² (320 to 600 ft²)
Viscosity (25°C) 15-25 secs. (Coupe Ford #4)
Solids by Volumes (%) 29 - 31% 29 - 31%
Drying* 24 to 48 hours normals conditions: 25°C & 50% R.H.
Storage Temperature 15 to 25°C, Keep from Freezing

* Drying Time depend  of surface porosity and temperature.

Restriction
Keep FROM FREEZING. Do not alternate with another product.
Note
Following final application, light traffic may be allowed after 24 hours of drying. However, it is better to wait over 48 hours before replacing furnitures. Watch out for scratches. Complete curing takes approximately 7 days. Note that 90% of hardness is obtained after 3 days. Do not put rugs and carpets on the new finish and do not clean the floor until complete curing of the product.
Warranty
The customer shall verify of the suitability of this product for the intended purpose. Applicator’s skill, weather and surface conditions being beyond manufacturer’s control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. Free on board (FOB plant).

Water-based crystal varnish
Water-based crystal varnish
Ecologic
Warning Simdut

MAY IRRITATE EYES AND SKIN. Do not get in eyes, on skin or on clothing. Keep out of reach of children.


FIRST AID TREATMENT: Contains Stoddard solvent. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, clean with mineral oil followed by soapy water then rinse well.
 
PDFdownload PDF version