All Seasons Professionnal Plastic Cement Français
Description
The CR-200 is an asbestos free all-purpose waterproof mastic asphalt based, intended for application on wet surfaces. Its gelatinous consistency allows easy application even by cold weather. Does not leak on vertical surfaces when application does not exceed 6 mm (1/4'') thickness. Insures ease application being less sensitive to temperature variation. Mainly used to bond asphalt shingles but also for flashings, skylights, sign fixation parts installations and repairs. Can be used to glue back asphalt shingles and protecting them from wind.
Surface Preparation
Surfaces must be sound, clean and free of dust, dirt, rust, oil, grease, chipped paint, frost or any other contaminants.
Application
Apply with a putty knife, a trowel or by hand with a glove. To repair or install new flashings, apply a continuous 3 mm (1/8'') coat on the surface and exceed by 150 mm (6'') on each sides. To ease application in cold season, keep the product in a warm place.
Cleanning
Clean tools and equipment with mineral spirits.
Norm
CAN/O.N.G.C. 37.5-M89
Package
Available in 4 kg and 20 kg.
Shelf Life
This product can be conserved in its original container, tightly sealed, up to 12 months after purchasing date by the applicator.
Technical Data Table
Specifications  
Color Black
Solids by Volume 70 %
Weight 1,17 kg/L (9,8 pounds/gal)
Coverage 0,3 m²/kg (3,2 ft²/kg) per coat 3 mm (1/8'')
Dry Time*

To 50 % R.H. 20°C (68°F)

To the Touch* 4 hours
Completely Dry* 48 hours
Service Temperature Maximum : 85°C (185°F) dry coating
Application Temperature Ambient (Thickens at low temperature)
Chemical Resistance

Resistant to water calcium chloride, salt and to lightly acid or alkaline solutions. Is not resistant to oils, greases and solvents.

Permeance to Water Vapor (ASTM E96) 3 mm (1/8'') coat before drying 2.9 ng/Pa.m2.s (0.05 perms)
 

* Dry Time dependent of surface porosity and temperature.

Restriction
If product is applied near a ventillation unit or air conditioner, take necessary precautions to avoid solvent odor infiltration inside. Protect freshly applied product and open container from open flame and adjacent welding activity. For EXTERIOR USE only.
Warranty
5 years limited warranty when installed and / or applied as recommended by the manufacturer. We will replace the product with a manufacturing defect. Under no circumstances will the manufacturer be liable for any amount in excess of the purchase price of the product used. The consumer must ensure that this product is suitable for the intended use. Because of atmospheric conditions, applicator competence and surface conditions being independent of the manufacturer's control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid factory (FAB factory).

All Seasons Professionnal Plastic Cement
All Seasons Professionnal Plastic Cement
Sans Amiante
Avertissement Simdut Simdut

MAY CAUSE IRRITATION.
CONTENT MAY CATCH FIRE. COMBUSTION DANGER
FIRST AID: Skin contact : Wash skin immediately with soap and water.
Eye contact : Flush immediately with plenty of water for at least 15 minutes, lifting upper and lower eyelids. Consult a physician.
Clothes contact : Remove contaminated clothes.


Inhalation : Move the victim to fresh air. Consult a physician if necessary.
Ingestion : DO NOT INDUCE VOMITING. Give milk if conscious. Keep victim warm and call immediately a physician.

KEEP OUT OF REACH OF CHILDREN.
READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 
PDFdownload PDF version