Non-Fiber And Resaturating Roof Coating Français
Description
CR-30 is a non-fiber coating. It is formulated to waterproof concrete, wood, masonry and asphalt roofs. It doesn’t react to low temperatures and humidity. Doesn’t leak ones dried. It serves as a protecting coat on low-sloped roofs or on roofs retaining water. It can also be used to resaturate asphalt and felt roofs. It regenerates deteriorated surfaces. Improves service life of roofs.
Surface Preparation
Avoid use if showers are foreseen. Surfaces must be sound, clean and free of dust, dirt, rust, oil, grease, chipped paint, frost or any other contaminants. Previously fill holes, cracks and weak spots with Condor CR-20 and CR-25 plastic cement.
Application
Stir well before use. Apply in uniform coat with a squeegee, a brush, a roller or spray gun. To ease application during cold season, keep product in a warm place.
Cleanning
Clean tools and equipment with mineral spirits.
Norm
CAN/O.N.G.C. 37-GP-6MA
Package
Available in 3.78 L and 18.9 L. Also in 205 L or vrac.
Shelf Life
This product can be conserved in its original container, tightly sealed, up to 12 months after purchasing date by the applicator.
Technical Data Table
Specifications  
Color Black
Solids by Volume 75 to 85%
Weight 0,93 kg/L (7,75 pounds/gal)
Coverage 1 to 2 L /m² (2 to 4 gal/100 ft²) per coat (1/8'')
Dry Time*

To 50 % R.H. 20°C (68°F)

To the Touch* 4 hours
Completely Dry* 48 hours
Service Temperature - 30°C à 95°C (- 22°F à 203°F)
Application Temperature Can be applied at low temperature but preferably above 10°C (50°F). Thickens at low temperature.
Chemical Resistance

Resistant to water calcium chloride, salt and to lightly acid or alkaline solutions. Do not resist to oils, greases and solvents.

Permeance to Water Vapor (ASTM E96) 3 mm (1/8'') coat before drying 2.9 ng/Pa.m2.s (0.05 perms)
 

* Dry Time dependent of surface porosity and temperature.

Restriction
If product is applied near a ventillation unit or an air conditioner, take necessary precautions to avoid infiltration solvent odor inside. Protect freshly applied product and open container from open flame and adjacent welding activity. For EXTERIOR USE only.
Warranty
5 years limited warranty when installed and / or applied as recommended by the manufacturer. We will replace the product with a manufacturing defect. Under no circumstances will the manufacturer be liable for any amount in excess of the purchase price of the product used. The consumer must ensure that this product is suitable for the intended use. Because of atmospheric conditions, applicator competence and surface conditions being independent of the manufacturer's control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid factory (FAB factory).

Non-Fiber And Resaturating Roof Coating
Non-Fiber And Resaturating Roof Coating
Écoresponsable
Avertissement Simdut Simdut

MAY CAUSE IRRITATION.
CONTENT MAY CATCH FIRE. COMBUSTION DANGER
FIRST AID: Skin contact : Wash skin immediately with soap and water.
Eye contact : Flush immediately with plenty of water for at least 15 minutes, lifting upper and lower eyelids. Consult a physician.
Clothes contact : Remove contaminated clothes.


Inhalation : Move the victim to fresh air. Consult a physician if necessary.
Ingestion : DO NOT INDUCE VOMITING. Give milk if conscious. Keep victim warm and call immediately a physician.

KEEP OUT OF REACH OF CHILDREN.
READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 
PDFdownload PDF version