Aluminum Elastomeric Paint Français
CR-380 is an high performance rubberized aluminum paint that gives, once dried, a reflective and nice finish to a majority of surfaces. It is formulated with asphalt, aluminum powder and selected resins. It help to low temperature absorption and offer a superior dilatation coefficient than any other substrate. It can be used to protect against UV rays and surface oxidation. CR-380 is mainly used as a reflective coating on asphalt roofs, flat or sloped or on a multi-coat base to be slightly more flexible. This finish coating has to be combined with Condor Flex line products.
Surface Preparation
Avoid application if showers are foreseen. Surfaces must be sound, clean and free of dust, dirt, rust, oil, grease, chipped paint, frost or any other contaminants. Previously fill holes, cracks and weak spots with CONDOR Rubberized plastic cement CR-320.
Stir well before use. Apply with a squeegee, a brush, a roller or a paintbrush. To ease application in cold season, keep product in a warm place.
Clean tools and equipment with mineral spirits.
CAN/O.N.G.C. 37.42-M89 type I
Available on 3.78 L and 18.9 L.
Shelf Life
This product can be conserved in its original container, tightly sealed, up to 12 months after purchasing date by the applicator.
Technical Data Table
Color Aluminum
Solids by Volume 50 to 60 %
Weight From 0,92 to 1,02 kg/L (7,7 to 8,5 pounds/gal)
Coverage 0,25 to 0,5 L/m² (1 gal/130 ft²)
Dry Time*

To 50 % R.H. 20°C (68°F)

To the Touch* 1 hour
Completely Dry* 8 to 12 hours
Service Temperature -30°C to 80°C (-22°F to 176°F)
Application Temperature Preferably above 10°C (50°F).
Chemical Resistance

Resistant to water calcium chloride, salt and to lightly acid or alkaline solutions. Is not resistant to oils, greases and solvents.

Permeance to Water Vapor (ASTM E96) 3 mm (1/8") coat before drying 2.9 ng/Pa.m2.s (0.05 perms)

* Dry Time dependent of surface porosity and temperature.

Avoid contact with polystyrene insulation foam or any solvent alterable materials. If product is applied near a ventilation unit or an air conditioner, take necessary precautions to avoid infiltration solvent odor inside. It is not recommended on bare wood or on porous surfaces. Make sure that bituminous surfaces or coal tar coatings are stable, completely dry and free of volatile residues. This product may change color in aluminum oxidizing environments. Do not apply if showers are foreseen or if there is a possibility of dew point before it is completely dry because humidity can tarnish freshly applied coating. Do not apply on wet surfaces. Protect freshly applied product and open container from open flame and adjacent welding activity. For EXTERIOR USE ONLY.
10 years limited warranty when installed and / or applied as recommended by the manufacturer. We will replace the product with a manufacturing defect. Under no circumstances will the manufacturer be liable for any amount in excess of the purchase price of the product used. The consumer must ensure that this product is suitable for the intended use. Because of atmospheric conditions, applicator competence and surface conditions being independent of the manufacturer's control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid factory (FAB factory).

Aluminum Elastomeric Paint
Aluminum Elastomeric Paint
Sans Amiante
Avertissement Simdut Simdut

CONTENTS MAY CATCH FIRE: Contains petroleum distillates. May cause dizziness, headache or nausea. May cause nose, throat, eyes and skin irritation. Keep away from heat sources, sparks and flames. Do not smoke. Use only with adequate ventilation. Do not breathe vapors. Wear safety glasses and appropriate gloves. KEEP OUT OF REACH OF CHILDREN.

FIRST AID TREATEMENT: Eyes : In case of contact, flush immediately with plenty of water for at least 15 minutes and get medical attention immediately; for skin, wash thoroughly with soap and water. If you experience difficulties in breathing, leave the area to obtain fresh air. If difficulties continues, get medical assistance immediately. If swallowed, do not induce vomiting. Get medical attention immediately.
PDFdownload PDF version