Asphalt Aluminum Paint Français
Description
Superior quality aluminum paint CR-80 is formulated with resins and a large quantity of aluminum powder. This asphalt based paint gives, once dry, a reflective, glossy and durable finish. It reduces temperature absorption and delays supports contraction and dilatation. Excellent protector against UV and oxidation for roofs, flashings, metal structures etc... You can also use on any other stable bituminous coating as CR-300, CR-340, coal tar coatings and flashing or on metal surfaces which have a very dry primer or paint.
Surface Preparation
Avoid use if showers are foreseen. Surfaces must be structurally sound, clean, dry and free of dust, dirt, rust, oil, grease, flakes and other contaminants. Old paints or coatings must be in good condition and strongly adhered. Previously, fill holes, cracks and week spots with Condor CR320 Rubberized plastic cement.
Application
Stir well before using. Apply with a squeegee, a brush, a roller or a paintbrush. Avoid over-brushing. First, apply a coat on overlaps and nails than, apply a coat uniformly all over the surface. We recommend two coats of 0.25 to 0.50 L/m² (1 gallon covers ± 130 ft²) per coat depending on surfaces. To ease application in cold season, keep product in a warm place.Do not apply if showers are foreseen or if there is a possibility of dew point before it is completely dry. Humidity can tarnish freshly applied coating. Direct application of product over felt coatings may affect its coating and result in sag of the felt on slope surfaces. Do not apply on wet surfaces. Protect freshly applied product and open container from open flame and adjacent welding activity.Make sure that bituminous surfaces or coal tar coatings are stable, completely dry and free of volatile residues.
Cleanning
Clean tools and equipment with mineral spirits.
Norm
CAN/O.N.G.C. 37.42-M89 type I
Package
Available in 3.78L and 18,9L.
Shelf Life
12 months after purchasing date when kept in its tightly closed original container.
Technical Data Table
Specifications  
Color Aluminum
Solids by Volume 50 to 60 %
Weight From 0,92 to 1,02 kg/L (7,7 to 8,5 pounds/gal)
Coverage 0,25 to 0,5 L/m² (1 gal/130 ft²)
Dry Time*

To 50 % R.H. 20° C (68° F)

To the Touch* 1 hour
Completely Dry* 8 to 12 hours
Service Temperature -30°C to 80°C (-22°F to 176°F)
Application Temperature Preferably above 10°C (50°F).
Chemical Resistance

Resistant to water calcium chloride, salt and to lightly acid or alkaline solutions. Do not resist to oils, greases and solvents.

Permeance to Water Vapor (ASTM E96) 3 mm (1/8'') coat before drying 2.9 ng/Pa.m2.s (0.05 perms)
 

* Drying Time depend of surface porosity and temperature.

Restriction
Avoid contact with polystyrene insulation foam or any solvent alterable materials. If applied near a ventillation unit or an air conditioner, take necessary precautions to avoid infiltration solvent odor inside. It is not recommended on bare wood or on porous surfaces. This paint may crack on smooth multi-coats asphalt roof coverings due to the instability of bitumen. This product may change color in aluminum oxidizing environments. For EXTERIOR USE only.
Warranty
5 years limited warranty when installed and / or applied as recommended by the manufacturer. We will replace the product with a manufacturing defect. Under no circumstances will the manufacturer be liable for any amount in excess of the purchase price of the product used. The consumer must ensure that this product is suitable for the intended use. Because of atmospheric conditions, applicator competence and surface conditions being independent of the manufacturer's control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid factory (FAB factory).

Asphalt Aluminum Paint
Asphalt Aluminum Paint
Écoresponsable
Avertissement Simdut Simdut

MAY CAUSE IRRITATION.
CONTENT MAY CATCH FIRE. COMBUSTION DANGER
FIRST AID: Skin contact : Wash skin immediately with soap and water.
Eye contact : Flush immediately with plenty of water for at least 15 minutes, lifting upper and lower eyelids. Consult a physician.
Clothes contact : Remove contaminated clothes.


Inhalation : Move the victim to fresh air. Consult a physician if necessary.
Ingestion : DO NOT INDUCE VOMITING. Give milk if conscious. Keep victim warm and call immediately a physician.

KEEP OUT OF REACH OF CHILDREN.
READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 
PDFdownload PDF version