Classic Force1 Black colored rust proofing Français
Description
The rust inhibitor Forces 1is a topquality product for the control of corrosion. Made of a special mix of chemical products which give excellent inhibitive rust protection, it release a pleasant smell during the application. It protects the metal surfaces constantly exposed to humidity and to the corrosive vapors. We use it mainly used for automotive, industrial and agricultural applications. Easy of apply, its gelatinous consistency allows it to scatter in cracks and other confined places where the water could go or stay and cause damages. Once dried, it forms a protective film that won’t leak. Used on internal surfaces, this permanent rust inhibitor offers an effective protection which can go to 10 years. Black colored, it is designed for general use.
Surface Preparation
Use a degreaser to eliminate all dirt and be sure that the surface is free of oil, frost, dust, chipped paint, humidity, rust and any loose or deteriorated materials that could affect bounding.
Application
Never apply on fibreglass or polymer that has not previously been coated with a primer at the factory. Stir well before use. As soon as the surface is clean and dry, apply in thin coats of 5 mils (1/16 inch.) minimum as fast as possible by spray or with a paintbrush. Take necessary precautions for your protection and for the cleanliness of places during the application.
Cleanning
Clean tools and equipment with mineral spirits.

Package
Available in 4L, 19,9 L 60 L and 205 L
Shelf Life
12 months after purchasing date when kept in its tightly closed original container. Store shielded away from the sun to avoid the product’s oxydation.
Technical Data Table
Specifications  
Appearence Black Color Gel
Solids by Volume 75 % to 85 %
Weight 1,21 (about) kg/L
Coverage 2 m²/L (about) by coat of 1/32 in
Dry Time

at 50 % H.R. 20° C (68° F)

Dry to the touch 5 hours (approx)
Service Temperature Maximum : 85° C (185° F) Dry coating
Caracteristics
  • Permanent Rust
  • Proofing for new and old vehicles
  • Long Lasting
  • Protective coating
  • Film that never dries
  • Dripless
Permeance to Water Vapor (ASTM E96) 3 mm (1/8 in) coat before drying 2.9 ng/Pa.m2.s (0.05 perms)
 

* Dry Time dependent of surface porosity and temperature.

Restriction
Avoid use where the smell of solvents may damage the food and other fragile products. To ease the application during the winter, keep the product in a cool place. Store away from sunlight to prevent premature oxidation of product.
Note
Never apply on fibreglass or polymer that has not previously been coated with a primer at the factory. Stir well before use.
Warranty
The customer shall verify of the suitability of this product for the intended purpose. Applicator’s skill, weather and surface conditions being beyond manufacturer’s control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant.

Classic Force1
Classic Force1
Avertissement Simdut Simdut

MAY CAUSE IRRITATION.
CONTENT MAY CATCH FIRE. COMBUSTION DANGER
FIRST AID: Skin contact : Wash skin immediately with soap and water.
Eye contact : Flush immediately with plenty of water for at least 15 minutes, lifting upper and lower eyelids. Consult a physician.
Clothes contact : Remove contaminated clothes.


Inhalation : Move the victim to fresh air. Consult a physician if necessary.
Ingestion : DO NOT INDUCE VOMITING. Give milk if conscious. Keep victim warm and call immediately a physician.

KEEP OUT OF REACH OF CHILDREN.
READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 
PDFdownload PDF version