Eagle H2O Rubberized Liquid Membrane Français
Eagle Black H2O is a rubberized liquid membrane excellent to repair and prevent cracks in joints of fiber-cement or concrete both inside and outside before applying finishes. This water-based blue membrane is a 100% acrylic emulsion that will give a flexible and robust finish. This is the perfect product to waterproof and seal cement-fiber panels and for ceramic showers, bathtubs and pools. This waterproofing membrane reduces moisture problems related to the hydrostatic pressure and is compatible with all polymer-modified mortars. This product meets ANSI 118.10 norm for waterproofing membranes for floors, walls and ceilings.
Surface Preparation
All surfaces shall be structurally sound, clean and free from traces of dust, oil, grease, wax, paint, curing agent, coatings and loose particles or any trace of acids, alkalis or any other material that can reduce adhesion. Ambient surface and product temperature must be superior than 10ºC (50ºF) and lower than 35ºC (95ºF) before the installation and for the first 24 hours.

3.78 L can cover up to 5.6 m² (60 ft²). Coverage rate and drying time are dependent of surface porosity, the thickness and temperature.

For optimum waterproofing, we recommend two layers to obtain thickness of about 12 to 15 mil of H2O. Let dry 24 hours between coats.
Keep from freezing. This product can be stored in its original non-opened container for 12 months after purchasing date.
Technical Data Table
Color Blue
Solid content 66 to 68%
Density 1,4 kg/L (14 pmd/gal)
PH 8.5 to 9.5
Coverage 3,2 m² (34 ft²) @ 0.76mm (30 mil ou 1/32”) thick
Drying time To 50 % H.R. 20° C (68° F)
To the toutch 2 hours
Completely dry 4 hours
Service température - 40° C to 90° C (- 40° to 195° F)
Application temperature minimum 10° C (50° F)
Chemical resistance Resist to most popular acids, alkalis, greases and solvents
Permeance to water (ASTM E96) Permeable
Permeance to rupture (ASTM D412) 350%
Strength at rupture (ASTM D412) 560 kPa (80 PSI)

* Drying time depends on application method, temperature and porosity surfaces

The customer shall verify of the suitability of this product for the intended purpose. Applicator's skill, weather and surface conditions being beyond manufacturer's control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant.

Eagle H<sub>2</sub>O
Eagle H<sub>2</sub>O
Warning Simdut

MAY IRRITATE EYES AND SKIN. Do not get in eyes, on skin or on clothing. Keep out of reach of children.

FIRST AID TREATMENT: Contains Stoddard solvent. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, clean with mineral oil followed by soapy water then rinse well.
PDFdownload PDF version