Eagle Patch Rapid-Set Patching Compound Français
Description
Eagle Patch is a polymer modified rapid-set cementitious mortar, formulated to patch holes, cracks, voids, depressions and other irregularities. This smooth finish mortar is specially to prepare interior plywood or concrete floors before installation of floor coverings like carpet, vinyl, composite tile, ceramic and hardwood. It is compatible with all types of floor covering adhesives. Eagle Patch is for residential, commercial and institutional uses but cannot be used as a wearing surface. When mixed with water, it serves to fill holes, voids and depressions from 1 mm (1/32”) up to 12 mm (½”) deep, or to level floors or making small slopes. Blended with Eagle Patch Plus, these two components give better adhesion on more difficult substrates like smooth concrete, cut-back adhesive traces, old ceramic tiles, etc.
Surface Preparation
All surfaces shall be structurally sound, clean and free from traces of dust, oil, grease, wax, paint, curing agent, coatings and loose particles, acids, alkalis or any other material that can reduce adhesion. The only recommended wood substrate for residential floors is exterior grade plywood installed in an interior dry area. All concrete substrates shall be completely cured and at least 28 days old. They must be roughened to completely remove all traces of paint, coating, loosely bonded toppings. Ambient surface and product temperature must be superior than 10ºC (50ºF)and lower than 35ºC (95ºF) during the installation and for the first 24 hours.
Mixing
In a clean container, pour exactly 320 ml of fresh clean water per kilogram. Add gradually Eagle Patch powder while mixing with a low-speed drill and a mixer. Blend for 1 to 2 minutes scraping recipient walls and paddle to obtain a homogeneous trowelable consistency. Spread immediately to the desired texture and finish. Mix portion of product that can be applied in less than 10 minutes.
Curing
Eagle Patch takes less than 60 minutes to dry. Curing time may vary according to temperature and humidity level. Make sure application is dry prior to allow light traffic for floor covering installation.
Cleanning
Clean working tools and hands with water while product is still fresh
Package
This product is available in 5 kg pail, 10 kg and 22,7 kg bags.
Storage
Store in a dry and fresh area. Keep from freezing. Shelf life is 12 months in its original non-opened container.
Technical Data Table
CARACTERISTICS CURE EAGLE PATCH (32% WATER) EAGLE PATCH (38% Latex)
Pot life   10 minutes 15 minutes
Set time initial / final ASTM C-191   11 minutes / 20 minutes 25 minutes / 35 minutes
Service time   60 minutes 60 minutes
Density ASTM C-185   1.75 kg/L 1.75 kg/L
Compressive strength ASTM C-109 4 hours
24 hours
7 days
28 days
20 MPa (2900 PSI)
29 MPa (4209 PSI)
38 MPa (5511 PSI)
47 MPa (6816 PSI)
12 MPa (1740 PSI)
15 MPa (2175 PSI)
21 Mpa (3045 PSI)
26 MPa (3771 PSI)
Flexural strength ASTM C-348 24 hours
7 days
28 days
8.0 MPa (1160 PSI)
9.0 MPa (1305 PSI)
12.5 MPa (1813 PSI)
6 MPa (870 PSI)
10 Mpa (1450 PSI)
12 MPa (1740 PSI)
Pull-out strength on concrete CSA A23.2-6B 7 days
28 days
2.8 MPa (406 PSI)
2.8 MPa (406 PSI)
1.9 MPa (275 PSI)
3.6 MPa (522 PSI)
Coverage per kg of product   0.28 m² (3 ft²) for a 3 mm (1/8”) thickness 0.33 m² (3.5 ft²) for a 3 mm (1/8”) thickness

* Drying Time depend of surface porosity and temperature

Restriction
Keep from freezing
Warranty
The customer shall verify of the suitability of this product for the intended purpose. Applicator's skill, weather and surface conditions being beyond manufacturer's control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant.

Eagle Patch
Eagle Patch
Ecologic
Avertissement Simdut Simdut

CORROSIVE: This product contains a cementitious blend and may cause eyes, skin and respiratory system irritation. When using this product: Wear safety glasses, gloves and a NIOSH approved anti-dust mask. Keep out of reach of children.


FIRST AID TREATEMENT: Skin contact: Wash with soap and water. Eye contact: Flush eyes immediately and abundantly with water for 15 minutes keeping eyelids opened. Consult a physician immediately. Ingestion: DO NOT INDUCE VOMITING. Give water if conscious. Keep victim warm and call immediately a physician.
 
PDFdownload PDF version