Eagle Quick Fix High quality quick setting mortar Français
Description
Eagle Quickfix is a high quality, rapid-setting, polymer modified single component thin-set mortar. It only needs water to install all types of natural stones and tiles, vitrified or not and also impervious like porcelain, inside, on horizontal or vertical surfaces. It has been specially formulated for fast-track projects either for residential or commercial uses. Take note that rigorous attention must be taken to execute surface preparation conform to trade practices and Eagle Black’s surface preparation guidelines.
Surface Preparation
All surfaces shall be structurally sound, clean and free from traces of dust, oil, grease, wax, paint, curing agent, coatings and loose particles, acids, alkalis or any other materials that can reduce adhesion. The only recommended wood substrate for residential floors is exterior grade plywood installed in an interior dry area. All concrete substrates shall be completely cured and at least 28 days old, free from hydrostatic conditions and/or extreme humidity problems. They must be roughened to completely remove all traces of paint, coating, loosely bonded toppings. Ambient, surface and product temperature must be superior than 10ºC (50ºF)and lower than 35ºC (95ºF) during the installation and for the first 24 hours.
Application
Spread and scratch mortar on surface to be covered with flat edge of trowel. Quickly add mortar and using notched side of the trowel, spread mortar uniformly, taking care to trace ridge lines in the same straight line direction. Prepare the quantity that can be apply in less than about 15 minutes. If ridges have slightly dried and there is skin formation at the surface, there will be no adherence, mortar will have to be removed and a fresh coat applied. Press tiles firmly with a back and forth motion across ridges to obtain full mortar transfer at the back of tiles. Tiles must be embedded at 1/3 of their thickness in mortar. Never wet tiles prior to their application, if so, it must be advised by tile manufacturer.
Mixing
In a clean container, pour 240 ml of fresh clean water per kilogram of Eagle Quickfix, add gradually powder while mixing with a low-speed drill and mixer. Blend for 1 to 2 minutes scraping recipient walls and paddle to obtain an homogeneous trowelable consistency. Apply immediately. Occasionally remix while using it, with no water addition.
Yield

Approximate coverage for a 22.7 kg (50lb) bag :
Trowel 6 X 6 X 6 mm (¼” X ¼” X ¼”) : 8.4 m² (90 ft²)
Trowel 6 X 10 X 6 mm (¼” X 3/8” X ¼”) : 6.0 m² (70 ft²)

Curing
Protect surfaces from light traffic for 3 hours. Curing time may vary according to temperature and humidity level. Make sure application is dry prior to allow light traffic for grouting. 
Cleanning
Clean working tools and hands with water while product is still fresh.
Package
Available in bag of 22.7 kg grey or withe.
Storage
Store in a dry and fresh area. Shelf life is 12 months in its original non-opened container.
Technical Data Table
CARACTERISTICS CURE Eagle Quick Fix
Pot life   30 minutes
Open time   15 minutes
Set time final ASTM C-191   45 / 65 minutes
Shear Strenth ANSI A118.1    
Wall Tiles 28 days 2,18 Mpa (316 Psi)
Mosaics 28 days 3,64 Mpa (528 Psi)
Quarrys 28 days 3,47 Mpa (503 Psi)
Quarrys / Plywood 28 days 1,25 Mpa (181 Psi)
 

* Drying Time depend of surface porosity and temperature.

Warranty
The customer shall verify of the suitability of this product for the intended purpose. Applicator's skill, weather and surface conditions being beyond manufacturer's control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant.

Eagle Quick Fix
Eagle Quick Fix
Ecologic
Avertissement Simdut Simdut

CORROSIVE: This product contains a cementitious blend and may cause eyes, skin and respiratory system irritation. When using this product: Wear safety glasses, gloves and a NIOSH approved anti-dust mask. Keep out of reach of children.


FIRST AID TREATEMENT: Skin contact: Wash with soap and water. Eye contact: Flush eyes immediately and abundantly with water for 15 minutes keeping eyelids opened. Consult a physician immediately. Ingestion: DO NOT INDUCE VOMITING. Give water if conscious. Keep victim warm and call immediately a physician.
 
PDFdownload PDF version