Wet & Dry Surface Plastic Cement Français
Description
P-25 Plastic Cement is excellent to fill cracks and holes on foundations and asphalt roofs, on shingle, vents and chimney flashings etc. It seals leaks and maintains watertightness. It is ideal on wet or dry surfaces. Once dried, it becomes a strong, waterproofed flexible coating and resists against bad weather. Use it to glue back asphalt shingles and protect them against wind.
Surface Preparation
Surface must be sound, clean and free of all loose or foreign materials. Avoid use if rain is foreseen. In cold season, keep product in a warm place. Apply product with a trowel, a putty knife or with a caulking gun. Close container after each use. EXTERIOR USE ONLY.
Cleanning
Clean tools and equipment with mineral spirits
Norm
CAN/O.N.G.C. 37.5M-89
Package
Offer in 300ml and 800ml tube, and 1kg, 4kg,12kg and 20kg pail.
Shelf Life
This product can be kept in its original container, hermetically closed for 1 year from date of purchase.
Technical Data Table
Color Black
Solids by Volume 70 to 80 %
Weight 1,21 kg/L (10,1 pound/gal)
Coverage

0,32 m²/kg (3,45 ft²/kg) for 3 mm (1/8'') coat
Tube : bead of 3 mm (1/8'') couvers ± 25 feet

Dry Time*

To 50 % H.R. 20° C (68° F)

To the Touch* ± 4 hours
Completely Dry* ± 48 hours
Service Temperature Maximum : 85° C (185° F) dry coating
Application Temperature 10° C (50° F) and more
Chemical Resistance Resistant to water calcium chloride, salt and to lightly acid or alkaline solutions. Do not resist to oils, greases and solvents.
Permeance to Water Vapor (ASTM E96) 3 mm (1/8'') coat before drying 2.9 ng/Pa.m2.s (0.05 perms)

*Drying Time depend of surface porosity and temperature.

Note
If product is applied near a ventillation unit or an air conditioner, take necessary precautions to avoid infiltration solvent odor inside. Protect new work from open flames and adjacent welding activity. Contains petroleum distillates; keep out of reach of children. Keep away from open flames, sparks or heat sources. Do not smoke.
Warranty
The customer shall verify of the suitability of this product for the intended purpose. Applicator's skill, weather and surface conditions being beyond manufacturer's control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant.

Wet & Dry Surface Plastic Cement
Wet & Dry Surface Plastic Cement
Sans Amiante
Avertissement Simdut Simdut

MAY CAUSE IRRITATION.
CONTENT MAY CATCH FIRE. COMBUSTION DANGER
FIRST AID: Skin contact : Wash skin immediately with soap and water.
Eye contact : Flush immediately with plenty of water for at least 15 minutes, lifting upper and lower eyelids. Consult a physician.
Clothes contact : Remove contaminated clothes.


Inhalation : Move the victim to fresh air. Consult a physician if necessary.
Ingestion : DO NOT INDUCE VOMITING. Give milk if conscious. Keep victim warm and call immediately a physician.

KEEP OUT OF REACH OF CHILDREN.
READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 
PDFdownload PDF version