N.I.S. Roofing Felt Adhesive Français
Description
P-50 is a excellent N.I.S. adhesive formulated with liquid asphalt and special fibers. To be used in cold-process application to bond felt, N.I.S. and bituminous papers. Semi-liquid consistency, it is ideal to glue back asphalt shingles and protect them against wind.
Surface Preparation
Avoid use if rain is forecast. Surface must be clean and free of all loose or foreign materials.
Application
To glue back shingles, apply a thin bead or in 3 points of 1'' of 1/8'' thick and put down the shingle. Close container after each use. EXTERIOR USE ONLY.
Cleanning
Clean tools and equipment with mineral spirits.
Norm
CAN/O.N.G.C. 37.4-M89
Package
Offer in 3.78L and 18.9L pail.
Shelf Life
This product can be kept in its original container, hermetically closed for 1 year from date of purchase.
Technical Data Table
Color Black
Solids by Volume 65 to 75 %
Weight 1,01 kg/L (8,4 pounds/gal)
Coverage 1,5 to 3,0 L/ m² (3 to 6 gal/100 ft²)
Dry Time*

To 50 % H.R. 20° C (68° F)

To the Touch* 4 hours
Completely Dry* 24 hours
Service Temperature -40° C to 85° C (-40° F to 185° F)
Application Temperature 10° C or more
Chemical Resistance Resistant to water calcium chloride, salt and to lightly acid or alkaline solutions. Do not resist to oils, greases and solvents.
Permeance to Water Vapor (ASTM E96) 3 mm (1/8'') coat before drying 2.9 ng/Pa.m2.s (0.05 perms)

*Drying Time depend of surface porosity and temperature.

Note
If product is applied near a ventillation unit or an air conditioner, take necessary precautions to avoid infiltration solvent odor inside. Protect new work from open flames and adjacent welding activity. Contains petroleum distillates; keep out of reach of children. keep away from open flames, sparks or heat sources. Do not smoke.
Warranty
The customer shall verify of the suitability of this product for the intended purpose. Applicator’s skill, weather and surface conditions being beyond manufacturer’s control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. Free on board (FOB plant).

N.I.S. Roofing Felt Adhesive
N.I.S. Roofing Felt Adhesive
Écoresponsable
Avertissement Simdut Simdut

MAY CAUSE IRRITATION.
CONTENT MAY CATCH FIRE. COMBUSTION DANGER
FIRST AID: Skin contact : Wash skin immediately with soap and water.
Eye contact : Flush immediately with plenty of water for at least 15 minutes, lifting upper and lower eyelids. Consult a physician.
Clothes contact : Remove contaminated clothes.


Inhalation : Move the victim to fresh air. Consult a physician if necessary.
Ingestion : DO NOT INDUCE VOMITING. Give milk if conscious. Keep victim warm and call immediately a physician.

KEEP OUT OF REACH OF CHILDREN.
READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 
PDFdownload PDF version