Quick Patch Roof Français
Quick Patch of THIROCO is a product formulated with asphalt of professional selection for multiple purposes. We use it mainly to repair and seal cracks up to a 6.4 mm deep (1/4'') on roofs, bituminous shingles, solins and others. It adheres in any seasons, even on dry or wet surfaces.
Surface Preparation
Avoid use if showers are foreseen. Surfaces must be sound, clean and free of dust, dirt, rust, oil, grease, chipped paint, frost or any other contaminants.
Do not apply if showers are foreseen. Apply with a brush or a paintbrush on horizontal or vertical surfaces. Fill cracks having up to 6.4 mm deep (1/4'') and cover them with 3 mm (1/8'') of product. Having filled deep cracks, let dry 1 hour to avoid that the second coat shrinks or splits. For deeper cracks or holes, place a fiber mesh under the coat of surface. To ease low temperature application, keep the product in a warm place.
Clean tools and equipment with mineral spirits.
CAN/O.N.G.C. 37.5M-89
Avalaible in pail of 4 kg and 10 Kg.
Shelf Life
This product can be conserved in its original container, tightly sealed, up to 12 months after purchasing date by the applicator.
Technical Data Table
Color Black
Solide 80 to 90 %
Application brush, paintbrush

4 kg pour ± 2 m² (21,5 ft²)
10 kg pour ± 5 m² (53,7 ft²)
The coverage rate is dependent of the surface porosity and temperature.

Density 1.008 kg/L ou 10.08 pounds/gallon imp.

±48 hours, Drying Time depend of surface porosity and temperature.

The use of this product in specific purposes is left at user’s discretion. For more information, contact the manufacturer. If product is applied near a ventillation unit of or an air conditioner, take necessary precautions to avoid solvent infiltration inside. Protect freshly applied product and open container from open flame and adjacent welding activity. Read warning part before using this product. For EXTERIOR USE only.
10 years limited warranty when installed and / or applied as recommended by the manufacturer. We will replace the product with a manufacturing defect. Under no circumstances will the manufacturer be liable for any amount in excess of the purchase price of the product used. The consumer must ensure that this product is suitable for the intended use. Because of atmospheric conditions, applicator competence and surface conditions being independent of the manufacturer's control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid factory (FAB factory).

Quick Patch Roof
Quick Patch Roof
PDFdownload PDF version