Plastic Cement Professional Français
Description
THIROCO Plastic Cement T-20 is a professional multipurpose asphalt product. It is mainly used to fill cracks, holes and repair deteriorated areas on foundations and asphalt roofs, shingle, vents and chimney joints. It is durable, flexible, waterproof, sun proof and acid resistant. Can be used to glue back asphalt shingles and protect them against wind.
Application
Do not apply if showers are forecast. Surfaces must be sound, clean and free of dust, dirt, rust, oil, grease, chipped paint, frost or any other contaminants. Apply with a trowel, a putty knife or a caulking gun or by hand with glove. To repair joints and cracks, deeply fill gaps and leave an excess at the surface to avoid water accumulation. To glue back shingles, apply only 3 points of about 25 mm (1'') at equal distances. Close container after each use. Keep the product in a warm place to ease application in cold season.
Cleanning
Clean tools and equipment with mineral spirits.
Norm
CAN/O.N.G.C. 37.5M-89
Package
Available in tube of 310 ml and in pails of 4 kg, 13.6 kg and 20 kg
Technical Data Table
Specifications  
Color Black
Solide 70 - 80 %
Application to trowel or putty knife Apply coat of 3 mm (1/8 po) let dry before covering.
Application Coalking gun Cut tip of the nuzzle at 90° to obtain bead of 6 to 12 mm (1/4'' to 1/2'').
Coverage

Tube : bead of 3 mm (1/8 in) covers ± 25 feet
4 kg for ± 1,28 m² (13,8 ft²)
13,6 kg for ± 4,35 m² (46,9 ft²)
20 kg for ± 6,41 m² (69 ft²)
The coverage rate is dependent of the surface porosity and temperature.

Density 1,15 g/L or 9,6 pounds/gal.
Drying ±48 hours, Drying Time depend of surface porosity and temperature.
Restriction
For EXTERIOR USES only
Note
The use of this product in specific purposes is left at user’s discretion. If product is applied near a ventillation unit or an air conditioner, take necessary precautions to avoid solvent infiltration odor inside. Protect new work from open flames and adjacent welding activity. Contains petroleum distillates; keep out of reach of children. Keep away from open flames, sparks or heat sources. Do not smoke.
Warranty
10 years limited warranty when installed and / or applied as recommended by the manufacturer. We will replace the product with a manufacturing defect. Under no circumstances will the manufacturer be liable for any amount in excess of the purchase price of the product used. The consumer must ensure that this product is suitable for the intended use. Because of atmospheric conditions, applicator competence and surface conditions being independent of the manufacturer's control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid factory (FAB factory).

Plastic Cement
Plastic Cement
Sans Amiante
Avertissement Simdut Simdut

MAY CAUSE IRRITATION.
CONTENT MAY CATCH FIRE. COMBUSTION DANGER
FIRST AID: Skin contact : Wash skin immediately with soap and water.
Eye contact : Flush immediately with plenty of water for at least 15 minutes, lifting upper and lower eyelids. Consult a physician.
Clothes contact : Remove contaminated clothes.


Inhalation : Move the victim to fresh air. Consult a physician if necessary.
Ingestion : DO NOT INDUCE VOMITING. Give milk if conscious. Keep victim warm and call immediately a physician.

KEEP OUT OF REACH OF CHILDREN.
READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 
PDFdownload PDF version