Fibered Coating Français
Description
This professional high quality Fiber Coating T-40 is excellent to waterproof foundations and roofs. It is also to resaturate felt and asphalt roofs. It improves roof service life by regenerating deteriorated surfaces.
Application
Avoid use if showers are foreseen. Surfaces must be sound, clean and free of dust, dirt, rust, oil, grease, chipped paint, frost or any other contaminants.Previously fill holes, cracks and weak spots with THIROCO’s Plastic Cement T-20. Stir well before use. Apply with a squeegee, a brush or a roller.
Cleanning
Clean tools and equipment with mineral spirits.
Norm
CAN/O.N.G.C. 37-6MA
Package
Available in pails of 3.78 L and 18.9 L.
Shelf Life
This product can be conserved in its original container, tightly sealed, up to 12 months after purchasing date by the applicator.
Technical Data Table
Specifications  
Color Black
Solide 65 - 75 %
Application Brush, paintbrush, roller, squeeze
Coverage 3.78 l for ± 3,9 m² (41,6 ft²)
18.9 l for ± 19,3 m² (208 ft²)
The coverage rate is dependent of the surface porosity and temperature.
Density 0,96 kg/L or 8,0 pounds/gal.
Drying ±48 hours, Drying Time depend of surface porosity and temperature.

* Drying Time depend of surface porosity and temperature.

Restriction
If product is applied near a ventilation unit or an air conditioner, take necessary precautions to avoid solvent odor infiltration inside. Protect new work from open flames and adjacent welding activity. Contains petroleum distillates; keep out of reach of children. Keep away from open flames, sparks or heat sources. Do not smoke. For EXTERIOR USES only.
Note
The use of this product in specific purposes is left at user’s discretion. If used on a roof with a slope of more than 4/12, take necessary precautions to avoid sliding of product until completely dry.
Warranty
10 years limited warranty when installed and / or applied as recommended by the manufacturer. We will replace the product with a manufacturing defect. Under no circumstances will the manufacturer be liable for any amount in excess of the purchase price of the product used. The consumer must ensure that this product is suitable for the intended use. Because of atmospheric conditions, applicator competence and surface conditions being independent of the manufacturer's control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid factory (FAB factory).

Fibered Coating
Fibered Coating
Sans Amiante
Avertissement Simdut Simdut

MAY CAUSE IRRITATION.
CONTENT MAY CATCH FIRE. COMBUSTION DANGER
FIRST AID: Skin contact : Wash skin immediately with soap and water.
Eye contact : Flush immediately with plenty of water for at least 15 minutes, lifting upper and lower eyelids. Consult a physician.
Clothes contact : Remove contaminated clothes.


Inhalation : Move the victim to fresh air. Consult a physician if necessary.
Ingestion : DO NOT INDUCE VOMITING. Give milk if conscious. Keep victim warm and call immediately a physician.

KEEP OUT OF REACH OF CHILDREN.
READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 
PDFdownload PDF version