N.I.S. Adhesive Français
Description
This high quality T-50 N.I.S. Adhesive for professional is formulated with asphalt and fibers and is specially to glue back asphalt shingles or asphalt felt papers.
Application
Avoid use if showers are foreseen. Surfaces must be sound, clean and free of dust, dirt, rust, oil, grease, chipped paint, frost or any other contaminants. Previously fill holes, cracks and weak spots with THIROCO’s Plastic Cement T-20. Stir well before use. Apply with a squeegee, a brush or a roller. Apply a thin coat of 1/8'' maximum with a paintbrush under asphalt shingles.
Cleanning
Clean tools and equipment with mineral spirits.
Norm
CAN/O.N.G.C. 37.4M-89
Package
Available in pails of 3,78 L and 18,9 L.
Shelf Life
12 months after purchasing date when kept in its tightly closed original container.
Technical Data Table
Specifications  
Color Black
Solide 65 - 75 %
Application Brush, paintbrush, roller, squeeze
Coverage 3,78 l for ± 3,5 m² (37,8 ft²)
18,9 l for ± 17,5 m² (189 ft²)
The coverage rate is dependent of the surface porosity and temperature.
Density 0,98 kg/L ou 8,2 pounds/gal.
Drying ±24 hours, Drying Time depend of surface porosity and temperature.

* Drying Time depend of surface porosity and temperature.

Restriction
Protect new work from open flames and adjacent welding activity. Contains petroleum distillates; keep out of reach of children. Keep away from open flames, sparks or heat sources. Do not smoke. For EXTERIOR USES only.
Note
The use of this product in specific purposes is left at user’s discretion. If product is applied near a ventillation unit or an air conditioner, take necessary precautions to avoid solvent odor infiltration inside.
Warranty
10 years limited warranty when installed and / or applied as recommended by the manufacturer. We will replace the product with a manufacturing defect. Under no circumstances will the manufacturer be liable for any amount in excess of the purchase price of the product used. The consumer must ensure that this product is suitable for the intended use. Because of atmospheric conditions, applicator competence and surface conditions being independent of the manufacturer's control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid factory (FAB factory).

 N.I.S. Adhesive
 N.I.S. Adhesive
Sans Amiante
Avertissement Simdut Simdut

MAY CAUSE IRRITATION.
CONTENT MAY CATCH FIRE. COMBUSTION DANGER
FIRST AID: Skin contact : Wash skin immediately with soap and water.
Eye contact : Flush immediately with plenty of water for at least 15 minutes, lifting upper and lower eyelids. Consult a physician.
Clothes contact : Remove contaminated clothes.


Inhalation : Move the victim to fresh air. Consult a physician if necessary.
Ingestion : DO NOT INDUCE VOMITING. Give milk if conscious. Keep victim warm and call immediately a physician.

KEEP OUT OF REACH OF CHILDREN.
READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 
PDFdownload PDF version