Permanent Black Rustproofing Classic Force 1
The rustproofing Classic Force 1 is a black product composed of corrosion inhibitors, wax, polymer, virgin oil and bitumen. The coating formed protects new or used metal surfaces against rust formation. The addition of polymer and bitumen provides exceptional adhesion to surfaces and considerably increases its protection against corrosion. Being black, it becomes the ideal product for non-visible surfaces of the vehicle. This product has a gelatinous consistency which allows the product to be easily dispersed in areas where water may collect. It forms a barrier that remains flexible at any temperature. Its high adhesion increases its durability so the product will not wash out. Its fruity odor makes it pleasant to use for applicators and the customers. Used indoor and outdoor surfaces, it provides effective protection up to 10 years.
Do you want to buy this product?
Advantages
- Very high adhesion
- Black finish
- Doesn’t leak
- Does not wash out, very durable
- Made of virgin raw materials, without any contaminant
- Fruity odor
- Doesn’t damage paint or rubber trimmings
- Won’t crack and stays flexible
- Protection up to 10 years
Function
Protection against rust formation
Application Fields
Automobile / Truck / Industrial Application / Agricultural Application
Surfaces
New or used metal / Parts exposed directly to the weather: rocker panels, fender wheels, Wheel arch, underbody, frame.
Coverage
2m²/L layer of 1/32 in
Color
Black gel
Application Temperature
10°C and more
Service Temperature
Max 85°C
Application Tools
Spray gun / Paint brush
Surface Preparation
Degrease and remove all dirt by alkaline or high pressure cleaning with a suitable detergent. Eliminate any moisture, rust, or other materials that could prevent the product's effectiveness.
Application
Ideally, keep the product in a temperate place. Shake well by tumbling or rolling on the ground before application. Following cleaning and thorough drying of the vehicle, apply the product in a thin layer at least 5 mils thick using a spray or brush. Use the necessary safety precautions for personal protection and cleanliness of the place of application.
Drying
Allow about 5 hours for surface drying. The drying time depends on the application method, the ambient temperature and the surface.
Restriction / Caution
Avoid using this product where the smell of solvents may affect food or other products that may be affected. Never apply tothe inside of polymer panel, ou electrical components or on fiberglass that has not been pre-coated with a factory primer.
Cleaning
Mineral spirits
Storage
The product should be stored away from the sun to prevent premature oxidation of the product. It can be kept in its original sealed container until 12 months after the date of purchase by the user.
- 4L
- 18,9L
- 58L
- 205L
The customer must ensure that this product is suitable for the intended purpose. Atmospheric conditions, applicator’s skills and surface conditions being beyond the manufacturer’s control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid plant (FOB plant).