Rubberized Flashing Cement — Wet and Dry Surface T-325
Thiroco T325 is a new generation of rubberized plastic cement for wet and dry surfaces meeting the requirements of professionals and contractors. This product is used primarily to seal cracks, holes and to repair deteriorated areas on foundations, asphalt roofs, shingle flashings, vents and chimneys. This product has better strength and greater flexibility compared to regular plastic cements. The consistency of this product is designed to facilitate trowel application. It has excellent adhesion, good resistance to weather and temperature variations and forms a tough and waterproof coating once dry.
Do you want to buy this product?
Function
Seal / Repair
Building Components
Roofing / Foundation
Surfaces
Asphalt shingle / Concrete / Metal
Coverage
0,5 m²/kg applied 3 mm thick (2 ft²/lbs applied 1/8" thick)
Color
Black
Application Temperature
Any temperature but it is easier to apply the product when it is temperate.
Service Temperature
-40°C to 85°C
Application Tools
Putty knife / Trowel
Surface Preparation
Surfaces must be clean and free of dust, dirt or other contaminants. Excess water should be removed, if possible, before application of T325.
Application
Do not apply if rain is expected. During colder periods, keep the product in a temperate place to facilitate its application. Apply an average thickness of 3mm (1/8in). To seal joints and cracks, press tightly to seal all gaps. To repair a larger crack, apply the Thiroco T-325 to cover the damaged surface then place a reinforcement membrane and then apply another coat of Thiroco T-325 over the entire patch. Close the container after each use.
Drying
Allow about 4h for surface drying and 48h for complete drying. The drying time depends on the application method, the ambient temperature, the surface and the thickness applied.
Limitation / Précaution
Garder hors de la portée des enfants. Si le produit est appliqué près d'une unité de ventilation ou de climatisation, prendre les précautions nécessaires pour éviter l'infiltration d'odeurs de solvant vers l'intérieur. Tenir tout contenant ouvert ou produit fraîchement appliqué loin des flammes ouvertes, étincelles ou toutes autres sources de chaleur. Pour usage extérieur seulement.
Nettoyage
Essence minérale
Entreposage
Le produit peut être conservé dans son contenant original hermétiquement fermé jusqu'à 12 mois après la date d'achat par l'utilisateur.
- 13,6kg
- 20kg
10 years limited warranty when installed and / or applied as recommended by the manufacturer. We will replace the product with a manufacturing defect. Under no circumstances will the manufacturer be liable for any amount exceeding the purchase price of the product used. The consumer must ensure that this product is suitable for the intended use. Because of atmospheric conditions, applicator competence and surface conditions being independent of the manufacturer’s control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid plant (FOB plant).