Non-fibered Roof Coating
T-30
The T30 is a professional non-fibrous coating for roofing. This liquid coating extends the useful life of roofs by regenerating damaged surfaces. It is also used to waterproof concrete, wood, masonry and asphalt roofs. Once dried, the product forms a waterproof membrane that remains flexible to temperature fluctuations. It is ideal for low slope or water retaining roofs. It is also used to resaturate damaged asphalt shingles.
Do you want to buy this product?
Function
Waterproof / Resaturate / Regenerate
Building Components
Roofing
Surfaces
Concrete / Wood / Masonry / Shingle / Metal
Coverage
1,5 m²/L (60 ft²/gallon)
Color
Black
Application Temperature
10°C and more preferably. The product will be thicker when the temperature decreases.
Service Temperature
-40°C to 85°C
Application Tools
Squeegee / Brush / Roller / Spray gun / Paint brush
Surface Preparation
Surfaces must be clean and free of dust, dirt or other contaminants. Surface repairs must first be done with plastic cement from Thiroco.
Application
Do not apply if rain is expected. During colder periods, keep the product in a temperate place to facilitate its application. Stir well before application. Apply the product in an even layer. If the product is applied on a slope higher than 4/12, take the necessary precautions by applying a very thin layer to prevent slipping of the product until it is completely dry. Close the container after each use.
Drying
Allow about 4h for surface drying and about 48h for complete drying. The drying time depends on the application method, the ambient temperature, the surface and the thickness applied.
Restriction / Caution
Keep out of the reach of children. If the product is applied near a ventilation or air conditioning unit, take the necessary precautions to prevent infiltration of solvent odours toward the inside. Keep open container or freshly applied product away from open flames, sparks or other sources of heat. For outdoor use only.
Cleaning
Mineral spirits
Storage
The product may be kept in its original sealed container up to 12 months after the date of purchase by the user.
- 3,78L
- 18,9L
10 years limited warranty when installed and / or applied as recommended by the manufacturer. We will replace the product with a manufacturing defect. Under no circumstances will the manufacturer be liable for any amount exceeding the purchase price of the product used. The consumer must ensure that this product is suitable for the intended use. Because of atmospheric conditions, applicator competence and surface conditions being independent of the manufacturer’s control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid plant (FOB plant).