Asphalt Aluminum Paint
CR-80
The CR80 is an aluminum paint based on asphalt, aluminum paste and specially selected resins to offer a superior quality product. Its application gives to any metal or bitumous surface a decorative and reflective finish. The reflective aspect repels UV rays, lowers heat’s absorption on the surface and thus delays the contraction and dilation of the various substrates. Application on metal prevents corrosion from damaging the painted surface.
Do you want to buy this product?
Function
Paint
Building Components
Roofing / Building / Metal structure
Surfaces
Metal / Bituminous surface
Coverage
2 to 4 m²/L (80 to 160 ft²/gallon)
Color
Black
Application Temperature
Above 5°C
Service Temperature
-40°C to 85°C
Application Tools
Spray gun / Paint brush / Roller
Surface Preparation
Surfaces must be clean and free of dust, dirt or other contaminants. Existing paints and coatings must be in good condition and well adhered. Surface repairs must first be done with plastic cement from Condor.
Application
Do not apply if rain is expected and/or if dew may occur before complete drying. Stir well all the contents of the pail before application. The product does not require any dilution. First, apply a layer on the overlaps and nail heads. Then apply an evenly thin layer of the product over the entire surface. The application of 2 layers of coating is recommended. Close the container after each use.
Drying
Allow about 1h for surface drying and about 8-12h for complete drying. The drying time depends on the application method, the ambient temperature, the surface and the thickness applied.
Restriction / Caution
Avoid any contact with polystyrene insulation panel, solvent-sensitive materials or coal tar products. Do not apply on wet surfaces, wood or on any highly absorbent surfaces. It is important to make sure that the bitumen coatings are stable, completely dry and free of volatile residues. There is a risk of colour change in environments conducive to aluminum oxidation. Moisture can tarnish freshly applied coating and prevent it from drying out. Keep out of the reach of children. If the product is applied near a ventilation or air conditioning unit, take the necessary precautions to prevent infiltration of solvent odours toward the inside. Keep open container or freshly applied product away from open flames, sparks or other sources of heat. For outdoor use only.
Cleaning
Mineral spirits
Storage
The product may be kept in its original sealed container up to 12 months after the date of purchase by the user.
- 3,78L
- 18,9L
5 years limited warranty when installed and / or applied as recommended by the manufacturer. We will replace the product with a manufacturing defect. Under no circumstances will the manufacturer be liable for any amount exceeding the purchase price of the product used. The consumer must ensure that this product is suitable for the intended use. Because of atmospheric conditions, applicator competence and surface conditions being independent of the manufacturer’s control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid factory (FAB factory).