Solvent-based Concrete Sealer
This concrete sealer is a solvent-based coating that penetrates deeply and seals your surfaces against the absorption of water, oil and dust making it easier to clean. It protects your surface from tire marks, petroleum products and calcium, among other things. The product will not flake or discolour and forms a translucent film when dried. Its special formulation provides long-lasting protection.
Do you want to buy this product?
Function
Seal
Building Components
Pavement
Surfaces
Concrete
Coverage
Smooth Surface : 7,5 to 12,5 m²/L (300 to 500 ft²/gallon)
Rough Surface : 3 to 4 m²/L (120 to 160 ft²/gallon)
Color
Clear
Application temperature
10°C and above
Service temperature
-40°C to 85°C
Application tools
Spray gun / Paint brush / Roller
Surface preparation
Surfaces must be clean and free of dust, dirt or other contaminants.
Application
Do not apply if rain is expected and/or if dew may occur before complete drying. Stir well all the contents of the pail before application. During the application and during the complete drying, the temperature should be above 10°C. Apply the product in 2 thin coats evenly over the entire surface, allowing about 20 minutes to dry between coats. Allow to dry and harden, protecting the surface against weathering. Close the container after each use.
Drying
Allow to dry and harden before allowing movement or repositioning of furniture.
Cleaning
Mineral spirits
Storage
The product may be kept in its original sealed container up to up to 12 months after the date of purchase by the user.
- 3,78L
- 18,9L
The customer shall verify of the suitability of this product for the intended purpose. Applicator’s skill, weather and surface conditions being beyond manufacturer’s control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant.